Skip to content
In-stock items ship within 1 working day from the Czech Republic (EU); other items show their lead timeFree samplesRequest a quote
EROHE
Cart
EROHE
Account Cart

9 mm screw caps (ND9)

9 mm blue polypropylene short-thread screw caps with 5.5 or 6 mm centre holes and PTFE/silicone septa: plain, pre-slit, cross pre-slit, bonded and PTFE/silicone/PTFE versions.

How to choose

Products
12
In stock in the Czech Republic
1
Quick orderPaste SKUs and quantities from your spreadsheet or PO

One line per product: SKU, then the number of packs. Up to 60 lines.

12 of 12 products

Products

Compare 9 mm screw caps (nd9)

Rows that differ are in bold.

The vial decides the cap. Match the neck and closure type first, then choose the septum material and the cap style.

Step 1: Match the cap to the vial neck

Vial neckTypical vialsCap to order
8-425 screw2 ml, 11.6 × 32 mm8 mm screw cap (ND8)
9 mm short thread2 ml and 0.3 ml, 11.6 × 32 mm9 mm short-thread screw cap (ND9)
11 mm crimp2 ml and 0.3 ml, 11.6 × 32 mm11 mm aluminium crimp cap (ND11)
13-425 screw4 ml, 14.5 × 45 mm13 mm screw cap (ND13)
15-425 screw8 ml and 12 ml15 mm screw cap (ND15)
18 mm precision screw10 ml and 20 ml headspace18 mm magnetic screw cap (ND18)
20 mm crimp6, 10 and 20 ml headspace20 mm crimp cap (ND20)
24-400 screw20 to 60 ml EPA vials24 mm screw cap (ND24)

Thread systems are not interchangeable: a 9 mm cap will not seal an 8-425 or 10-425 vial, even though the sizes look close. Crimp caps need a hand crimper, and a decapper to remove them.

Step 2: Septum material

SeptumUse it forNote
PTFE/siliconeMost HPLC and GC work, repeat injectionsThe PTFE face meets the sample; the silicone reseals after the needle is withdrawn
PTFE/silicone/PTFESamples that may contact both faces of the septumPTFE on both sides for extra chemical resistance
PTFE onlySingle injectionsVery inert, but does not reseal after piercing
PTFE/butylHeadspace GC and volatile samplesButyl rubber has low gas permeability; rated for lower temperatures than silicone
PE foam linerClosed caps for storageNot intended for needle piercing

Temperature ratings are on each product page. In this range, PTFE/silicone septa are listed for -60 to 200 °C and PTFE/butyl for -60 to 120 °C.

Step 3: Cap style

  • Centre hole or closed top: caps with a centre hole leave the septum open to the needle; closed-top caps are for storage and transport.
  • Pre-slit septa: easier needle entry, less coring and no vacuum in the vial during sampling. They reseal less well, so avoid them for volatile samples left in the tray for a long time.
  • Bonded septa: the septum is fixed in the cap, so it cannot fall out or turn during handling.
  • Magnetic caps: for autosamplers that pick up vials with a magnet, which is common in headspace GC.
  • Pressure-release caps: 20 mm headspace caps that vent excess pressure when the vial is heated.

Caps and septa are sold in packs of 100. Order caps with vials: on EROHE, equal packs of 9 mm vials and caps get 5% off both. Not sure which cap fits your vial? Email sales@erohe-lab.com with the vial part number.

Questions buyers ask

Which vials do 9 mm caps fit?

Vials with a 9 mm short-thread neck, such as the EROHE 2 ml and 0.3 ml 9 mm vials. They do not fit 8-425 or 10-425 vials.

Is there a discount if I buy caps with vials?

Yes. Equal packs of 9 mm vials and 9 mm caps get 5% off both, on top of the quantity discount.

What is a bonded septum?

A septum fixed to the cap, so it cannot fall out or turn when the cap is screwed on or pierced.

What is the difference between pre-slit and cross pre-slit?

A pre-slit septum has a single cut; a cross pre-slit septum has two crossing cuts for even easier needle entry.