ER00416
8 ml Clear Screw Vials, 15-425 Thread, 16.6 × 60 mm, 100/pk
8 ml, 15 mm, Clear, 16.6 × 60 mm
Lead time 3-4 weeks, ships from the Czech Republic (EU)
€20.94 per pack of 100 €0.21 per vial
8 and 12 ml screw vials (ND15)
8 ml (16.6 × 60 mm) and 12 ml (18.5 × 65 mm) glass screw vials with a 15-425 thread, in clear and amber glass.
They suit larger samples, standards and storage, in packs of 100. Items not in stock have a lead time of 3 to 4 weeks.
- Products
- 4
Quick orderPaste SKUs and quantities from your spreadsheet or PO
Products
ER00417
12 ml Clear Screw Vials, 15-425 Thread, 18.5 × 65 mm, 100/pk
12 ml, 15 mm, Clear, 18.5 × 65 mm
Lead time 3-4 weeks, ships from the Czech Republic (EU)
€24.44 per pack of 100 €0.24 per vial
ER00418
8 ml Amber Screw Vials, 15-425 Thread, 16.6 × 60 mm, 100/pk
8 ml, 15 mm, Amber, 16.6 × 60 mm
Lead time 3-4 weeks, ships from the Czech Republic (EU)
€20.94 per pack of 100 €0.21 per vial
ER00419
12 ml Amber Screw Vials, 15-425 Thread, 18.5 × 65 mm, 100/pk
12 ml, 15 mm, Amber, 18.5 × 65 mm
Lead time 3-4 weeks, ships from the Czech Republic (EU)
€24.44 per pack of 100 €0.24 per vial
No products match these filters.
Start from your autosampler: it decides the vial size and neck. Then pick the glass colour and the cap.
Step 1: Neck size and closure
| Neck | Closure | Typical use |
|---|---|---|
| 9 mm short thread (9-425) | Screw cap with septum | The most common HPLC format; wide opening, easy to fill |
| 8 mm (8-425) | Screw cap with septum | Older and some specific autosamplers |
| 10 mm (10-425) | Screw cap with septum | Specific autosampler models |
| 11 mm crimp or snap | Aluminium crimp cap or snap cap | GC and volatile samples (crimp seals tightest) |
| 18 mm and 20 mm | Magnetic screw or crimp cap | Headspace GC |
Standard 2 ml vials measure 11.6 × 32 mm (often written 12 × 32 mm). Check the vial format in your autosampler manual; a free sample lets you test the fit in your rack.
Step 2: Clear or amber glass
Use amber glass for light-sensitive compounds. Use clear glass for everything else, so you can see the fill level and any particles.
Step 3: Caps and septa
PTFE/silicone septa suit most HPLC and GC work and reseal for repeat injections. Pre-slit septa reduce needle wear and stop a vacuum forming in the vial. Order caps and vials together: on EROHE, equal packs of 9 mm vials and caps get 5% off both.
Step 4: Small sample volumes
For volumes under 1 ml, use a glass insert in a standard vial, or a vial with a built-in conical insert, so the needle can still reach the sample.
Questions buyers ask
Which cap fits a 15-425 vial?
15 mm screw caps (ND15), available with a centre hole or closed top and PTFE/silicone septa.
8 ml or 12 ml: how do I choose?
Choose by the volume you need to hold plus headspace, and by the height your rack or instrument takes: the 8 ml vial is 60 mm tall and the 12 ml vial 65 mm.
Can these vials be used on an autosampler?
Only on autosamplers or samplers that accept vials of these dimensions; check your instrument's vial specification.